ARROW CASSETTE HUB(해외배송 가능상품) |
WeThePeople / GERMANY |
Made In Taiwan |
₩230,000 |
2,300 POINT (1%) |
독일 WE THE PEOPLE 사의 초경량 리어 카셋트 허브.
세계를 지배하는 최고급 파츠의 진화! 풀 CNC 6061-T6 공정완료된 허브쉘. 17mm 두께의 경량 강화 중공엑슬에 10mm 강화 볼트로 체결되는 방식. 14mm 컨버터 적용으로 14mm 용 드롭아웃에 장착가능. Q-lite 인터널 구조의 6개의 독립 폴 방식은 탁월한 내구성과 힘전달 실현. 구동 9 T 드라이버에는 IGUS 특수 부싱 베어링 장착으로 탁월한 구름성과 가벼운 무게를 자랑합니다. 페그를 사용하지 않는 라이더를 위해 8 mm 육각 렌치로 장착되는 구조 고품질의 실드 베어링 장착. 스윗치 드라이버 시스템: 내부 폴의 방향을 바꾸어 구동방향을 선택, 셋팅 가능. 실측 무게 : 404 grs. [초경량] *주의* 페그를 사용하지 않는 셋업을 위한 제품입니다. [페그리스 라이더 용] |
₩3,000 (₩50,000 이상 구매 시 무료) |
|
구동방향 셋팅 | |
---|---|
기본 우구동으로 설정되어 출고되며,
좌구동으로 변경하여 구입하고자 하시는 분께서는
구동방향 설정 옵션란에서 선택해주세요.
방문 구매 전 유선으로 연락주세요.
ARROW CASSETTE HUB
AN EVOLUTION OF OUR WORLD-RENOWNED SUPREME HUBS -
THE NEW ARROW HUBS ARE A SUPER LIGHTWEIGHT ALTERNATIVE FOR
THE PEGLESS RIDERS OUT THERE LOOKING FOR UNRIVALED PERFORMANCE AND QUALITY.
USING THE SAME BOMBPROOF Q-LITE INTERNALS AND "IGUS" BUSHING DRIVER AS THE SUPREME CASSETTE,
THE ARROW'S 7075-T6 ALLOY AXLE AND KNURLED CNC MACHINED CONES HELP KEEP THIS HUB INCREDIBLY LIGHT,
AND GIVE IT A SUPER SMOOTH LOOK UNLIKE ANY OTHER HUB ON THE MARKET.
SWITCH DRIVE SYSTEM
The Arrow uses our Q-Lite inverted system.
The Q-Lite system uses pawls and springs inside of the hub body, instead of on the driver.
This allows us to double the amount of pawls,
which not only makes the hub much more reliable,
but also puts less stress on the pawls and springs, allowing the hub to roll smoother and for longer.
This system has the benefit of letting you switch the drive side of the hub very easily.
IGUS BUSHING DRIVER
The hub uses an IGUS bushing driver;
a German made bushing that has far less resistance and more durability than most bushings.
The bushing driver eliminates the need for bearings,
allowing us to use a larger diameter 17mm axle all the way through the driver,
a part where most hubs go down to a smaller diameter to accommodate the bearing.
This makes the hub incredibly strong but still very low in weight.
MATERIAL:
full CNC 6061-T6 alloy refined hub-shell
AXLE:
17mm 7075-T6 alloy female axle with 10mm crmo bolts
BEARINGS:
3 high quality sealed bearings in hub shell
DRIVER:
long life German designed IGUS bushing driver
SPECIAL FEATURES:
very lightweight cassette hub with 707-T6 alloy centre axle
Q-LITE internals
compatible with Supreme hub guards
two bearings on non-drive side to increase smoothness and life of bearings
LSD/RSD switchable driver, one peice pawl/spring system
alloy CNC cones
specially deisgned cone-washers with knurled outer surface
게시물이 없습니다
게시물이 없습니다