CORTEX FRONT HUB(해외배송 가능상품) |
ECLAT / GERMANY |
Made In Taiwan |
₩90,000 |
900 POINT (1%) |
독일 ECLAT 사의 신형 프론트 허브.
검증 된 좁은 플랜지 간격 설계. 1년 동안 팀 라이더들에게 테스트를 마친 내구성이 검증된 신형 프론트 허브! 강한 내구성, 그라인드 트릭을 위한 프론트 허브. 강한 암볼트가 특징인 볼트 (피멀)방식. 6061 - T6 알로이 허브 쉘. 2개의 하이퀄리티 실드 베어링 적용. 36 홀 전용 컬러 : 블랙 무게 : 349 grs.[좌,우 허브가드 포함] |
₩3,000 (₩50,000 이상 구매 시 무료) |
|
4130 크로몰리 피멀 엑슬 (볼트온 방식). 10 mm 사이즈 (볼트 탈거시 페그툴 사이즈는 17 mm 소켓)
고강도 나일론 유리섬유 재질의 플라스틱 허브가드가 좌,우 기본 포함되어 있습니다.
[허브가드는 마모시 별도 구매하여 교체가 가능합니다.]
Cortex Front Hub
Much like our Freecoaster, the NEW Cortex front hub was designed for the streets.
Using the same proven narrow flange spacing as our famous Dynamic front hub, the Cortex comes out of
the box with x2 Nylon fibreglass hubguards which are long lasting and replaceable for a very low cost.
This hub has been tested by the team over the past year and is designed to keep you grinding on and on and on…
This hub features a longer 35mm bolt to accommodate plastic pegs and for a stronger female bolt setup.
SPEC
Material:
6061-T6 alloy refined hub-shell
Axle:
4130 crmo female axle. 3/8" thread
Bearings:
2 sealed high quality bearings
Spokes:
36h
Colors
black, high polished, satin oilslsick
Features:
allen key inner axle for easy maintenance / narrow flange for better spoke clearance when grinding
Measurements:
PCD: 38mm, Flange offset 26.75mm
Weight:
302g (10.65oz : 0.66lbs)
게시물이 없습니다
게시물이 없습니다