전체상품목록 바로가기

본문 바로가기

[New] ODYSSEY New CLUTCH PRO Freecoaster hub Black [RHD / LHD]
기본 정보
상품명 [New] ODYSSEY New CLUTCH PRO Freecoaster hub Black [RHD / LHD](해외배송 가능상품)
제조사 ODYSSEY / USA
원산지 Made In Taiwan
판매가 ₩275,000
적립금 2,750 POINT (1%)
상품간략설명



미국 ODYSSEY 사의 새로운 프리코스터 허브,
CLUTCH PRO (클러치 프로)!!! 입고!
THE EVOLUTION CONTINUES....
입증된 클러치 프리코스터 허브의 진화는 계속됩니다.

--------------------------------------------------------------

Clutch Pro는 부드러운 백 페달링과 빠른 크랭크 플립을 위해
완전히 새로운 드래그 메커니즘으로 제작되었습니다.
Odyssey 팀 라이더의 직접적인 피드백을 기반으로 제작되었으며
(@matt_nordstrom, @dennisenarson, @brocraiford, @johnnyraekesjr and more..)
새로운 플라스틱 가드 디자인도 제공합니다.
* 경량 PC 재질의 양쪽 가드 기본 제공 *
새로운 드라이브 사이드 가드는 체인과 스포크를 보호하고
그라인드 트릭 시 프레임 드롭아웃이 손상되지 않도록
최대한의 보호 범위를 제공합니다.
또한 그리스 포트가 있어 분해하지 않고도 허브를 윤활할 수 있습니다.
(6~8개월 정도에 한 번은 오버홀 작업을 받으시길 권장)
* 오버홀 : 허브 내부에 있는 오염된 그리스를 세척 후 다시 주입하는 작업 *

--------------------------------------------------------------

:::: 클러치 프로 허브의 가장 큰 특징 ::::
프리코스터 갭 (SLACK)을 조정하기 위해 공구가 필요 없습니다.
새롭게 적용된 외부 버튼(SLACK ADJUSTER BUTTON)을 누르고
휠을 앞뒤로 돌리기만 하면 필요에 따라 갭을 늘리거나 줄일 수 있습니다.
* 초기 출고 시 갭은 최대치 (+)로 세팅되어 있습니다. *

--------------------------------------------------------------

::::: 갭 조정 방법 및 주의 사항 ::::
(하단 'EXPLODED' 분해 조립도 참조)
갭(SLACK)의 양을 조정하려면 --
휠(허브)이 프레임 드롭아웃에 조여진 상태에서
물레방아처럼 생긴 내부 나사 조절 장치(SLACK ADJUSTER)에 있는
해당 홈의 하단 부분과 완전히 맞물릴 때까지
외부 버튼(SLACK ADJUSTER BUTTON)을 누른 채
허브를 "MINUS" 위치로 돌립니다.
”(-) 방향으로 눌러 갭을 최소화하거나 'PLUS'(+) 방향으로 눌러 갭을 늘립니다.
조정은 점차적으로 진행하면서 느슨한 정도를 확인해야 합니다.
내부 조절 장치가 비구동측 허브 쉘 베어링 또는
드라이버의 스레드에서 완전히 닿는 경우 끌림이 있을 수 있습니다.
베어링이나 드라이버 스레드에서 조절 장치를
약간 뒤로 젖혀서 느껴지는 끌림을 제거하십시오."

** 슈레드에서 직접 테스트해 본 결과
+와 -까지의 간격은 약 90도씩 6~7번 정도 이동하면
양 끝 지점에 닿는 점을 확인했습니다. 참고하세요! **

무리하게 갭을 조정하게 되면 SLACK ADJUSTER BUTTON이 파손될 수 있습니다.
(SLACK ADJUSTER BUTTON 파손 시 간단히 파츠 교체 가능)
* CLUTCH PRO 수리용 파츠 모두 슈레드에 입고 완료! *

::::: 추천 갭(SLACK)의 양 :::::
일반적으로 순정 갭으로 사용하시는 것을 권장하며,
360이나 바스핀, 테일윕 트릭을 연습 시엔 갭을 줄여 연습하면
착지 시 페달이 훅 들어가는 증상을 막아 연습에 도움이 됩니다.

::::: 크랭크 플랩 연습 시 갭(SLACK)의 양 :::::
최대(순정) 갭으로 설정하고, 체인은 약간 루즈한 상태가 되어야 합니다.

***** 가장 중요! *****
보다 정확한 관리 방법을 안내받으시길 권장하므로
슈레드 방문 구입 후 휠 빌딩 작업을 받으시길 적극 권장합니다.
* 갭 조정 및 분해는 전문 자전거 정비사가 수행해야 합니다.*

--------------------------------------------------------------

컬러 : 블랙
구동 방향 : 우구동 전용 (RHD) / 좌구동 전용 (LHD) 중 선택
실측 무게 : 645 grs. (허브 가드 모두 포함)

미국 특허 9,469,157 의 하이 메커니즘의 결정체!
간단히 외부에서 코스터 갭을 조정할 수 있는 유일한 허브!
명불허전 오디세이 '클러치 프로' 프리코스터 허브를
슈레드에서 만나보실 수 있습니다.

* 내부 파츠 트러블 시 수리할 수 있는 리페어 파츠들도
모두 입고되어 슈레드에 보유하고 있습니다.
트러블 발생 시 개별 문의 주세요~!
배송비 ₩3,000 (₩50,000 이상 구매 시 무료)
SNS 상품홍보
SNS 상품홍보

개인결제창을 통한 결제 시 네이버 마일리지 적립 및 사용이 가능합니다.

상품 옵션
구동 방향

[필수] Option

옵션 선택
상품 목록
상품명 상품수 가격
[New] ODYSSEY New CLUTCH PRO Freecoaster hub Black [RHD / LHD] 수량증가 수량감소 275000 (  2750)
TOTAL(QTY) : 0 (0개)

이벤트





CLUTCH PRO FREECOASTER HUBBlack

The evolution of our proven Clutch freecoaster hub continues.

The Clutch Pro comes built with an all-new bearing equipped drag mechanism for smooth backpedaling and fast crankflips.

Based on direct feedback from Odyssey team riders, the Clutch Pro also features all-new plastic guard designs.

The drive side guard provides maximum coverage to the chain and spokes while eliminating the need to spread the frame’s dropouts during installation, which can be detrimental to the frame's integrity. On the hub’s non-drive side, the guard makes use of a new shape for improved spoke coverage and durability.

To adjust the hub’s slack, a new tool-free external button engages with an internally threaded adjuster, then simply rotating the wheel forward or backward increases or decreases the slack as needed. The Clutch Pro also comes with a grease port so the hub can be lubricated without disassembly.

FEATURES

  • Ultra-smooth crankflip friendly drag mechanism
  • Unique drive side plastic guard design eliminates dropout spreading
  • Redesigned non-drive side plastic guard
  • Tool-free slack adjustment
  • Grease port simplifies lubrication
  • Proven, ultra-durable bearing arrangement
  • US Patent 9,469,157

SPECS

Driver: 9T, RHD or LHD
Axle: 4140 chromoly with in-bound 14mm bolts
Spoke Configuration: 36-Hole
Color: Black
Weight: TBA

WHEEL BUILDING INFO

Drive Side Effective Flange Diameter: 56mm
Non-Drive Side Effective Flange Diameter: 49mm
Drive Side Flange to Center: 28mm
Non-Drive Side Flange to Center: 29mm

BEARINGS

Hub Shell Non-Drive: 6003 Sealed
Hub Shell Drive Side: 7905A Sealed
Driver: K 20x24x13 Precision Caged Needle Roller




ADJUSTMENT AND DISASSEMBLY SHOULD BE PERFORMED BY A PROFESSIONAL BICYCLE MECHANIC

SLACK ADJUSTMENT: Clutch Pro freecoasters are assembled with maximum slack.

"To adjust the amount of pedaling slack - With the wheel tightened to the frame dropouts, press the “SLACK” button until it fully engages with the lower part of the corresponding grooves on the hub’s internal slack adjuster and rotate the hub in the “MINUS” (-) direction to minimize the slack, or in the “PLUS” (+) direction to increase the slack.
Adjustments should be incremental, checking the slack as you go.
Drag may be present if the internal adjuster fully bottoms out on the non-drive side hub shell bearing or the driver’s thread.
Back the adjuster off the bearing or driver thread slightly to eliminate any drag that is felt."

GREASE PORT: The Clutch Pro can be lubricated without disassembly by removing the grease port grub screw and adding grease to the internal cavity using a tube of light polylube bicycle grease.
A connecting straw between the tube of grease and the hub’s internal cavity may be helpful.
Add grease in small amounts and “work” the lubrication into the hub by pedaling and backpedaling the hub driver by hand before use.

"DISASSEMBLY: To disassemble the Clutch Pro, remove the non-drive side collar and use circlip pliers to remove the circlip from the non-drive side bearing cavity.
Back the drive side axle bolt out approximately halfway from the end of the axle and use a rubber mallet to carefully strike the end of the axle bolt, causing the axle to push the
non-drive side bearing out of the hub shell, allowing access to the hub's internal components.
The drag mechanism contains a loose-ball bearing configuration and should not be disassembled."

Replacement hub guards and parts are available at shredd bikes.



REVIEW

게시물이 없습니다

Write All View

Q & A

게시물이 없습니다

Write All View